Jinhu Color Powder Coating Co.Ltd 86-25-83318869 manager@colorpowdercoating.com
RAL 1003 Protective Antimicrobial Powder Coating For Outdoor Metal Structures

RAL 1003 Protective Antimicrobial Powder Coating For Outdoor Metal Structures

  • High Light

    antimicrobial surface coating

    ,

    antibacterial powder coating

  • Color
    Signal Yellow
  • Application
    Spray
  • MF
    Mixture
  • Gloss
    89%
  • Texture
    Hammer
  • Pencil Hardness
    H-2H
  • Place of Origin
    Ukraine
  • Brand Name
    TOPO
  • Certification
    CE, BV, ROHS
  • Model Number
    APC-RAL1003
  • Minimum Order Quantity
    Negotiable
  • Price
    Negotiable
  • Packaging Details
    Two-ply PVC bag inside with carton box, net weight 20/25kg
  • Delivery Time
    7 days
  • Payment Terms
    L/C, T/T, Western Union, MoneyGram
  • Supply Ability
    400 T/Month

RAL 1003 Protective Antimicrobial Powder Coating For Outdoor Metal Structures

RAL1003 signal yellow Antimicrobial Powder Coating to protect outdoor metal structures

 

Under certain conditions, microorganisms such as bacteria, fungi or algae can settle and proliferate
on any imaginable surface where they form a thin mucus layer, the biofilm.
This layer also protects the microorganisms. In the biofilm, their immunity against nutrient shortage,
extreme pH and temperature fluctuations, bactericides, but also UV and X-radiation increases. This
counteracts cleaning and preventive measures that rely on heat, cleaning agents or radiation.
Combating microorganisms continuously by means of antimicrobial powder coating is a suitable
supportive precaution.

 

 

Bad symtoms

Possible Cause

Solution

1.With low power, powder

coating is not easy to coated;

 

1. High voltage power supply shortage;

1.Check the circuit

2.Grouding is bad;

2.Remove clutter grouding line

3.Compressed air volume is too big,

the powder to blow fell &blows away;

3.Spray appropriate isolation,

reduct air convection;

4.Powder particle size is too thin;

4.Add new powder coating, reduce the

recovery powder consumption.

5.The air temperature is too high;

5.Powder particles with air water

branch of low power, control

temperature of spray area;

2. Charge repulsion powder

repboud from the working

surface;

1.The voltage is too high;

1. Lower voltage and air volume;

2.Spray gun from the work location is

too close;

2. Extend the spray gun and artifacts;

3. Grouding is bad;

3.Remove clutter grouding line;

4.Powder particle size is too thin, not

esay to attach to the workpiece surface;

4.Add new powder coating, reduce

the recovery powder consumption;

3. Corner not easy spraying

penetration is bad;

1. The powder amount is too small;

1. Lower voltage and air volume,

increasing the amount of powder;

2. Grouding is bad;

2. Adjust the spray gun position;

3. The voltage is too high;

3. Choose small backboard, proper nozzle;

4. Spray gun position is not good;

4.If the corner is more and deeper, then

consider friction gun equipment;

5. Powder spraying range is too wide;

4.Powder spraying uneven

1. Air pressure is insufficient;

1. Cleaning pipeline, spray gun and flowmeter;

2.Line fault block;

2.Check the air supply, Exclude water vapor

in powder agglomeration;

3.Block in the spray gun;

3.If powder agglomeration, to screen or

change new powder coating;

 

 

RAL 1003 Protective Antimicrobial Powder Coating For Outdoor Metal Structures 0    RAL 1003 Protective Antimicrobial Powder Coating For Outdoor Metal Structures 1