RAL1006 Maize yellow antique copper Textured Powder Coating for electric control cabinet
We’re a fully approved and licensed applicator of high-performance powder coatings as well as hybid, epoxys, and polyesters.
If you’re new to powder coating, it is simply a type of protective finish that is applied as a free-flowing dry powder. The powder’s base itself consists of resins, pigments, leveling agents, flow modifiers, and other curing agents. These ingredients are melted, mixed, cooled, and ground into a fine powder that has a striking resemblance to baking flour.
An attraction between the powder particles and the object occurs which is necessary for the powder to adhere to the item. Once the process is completed, your object will stand out because of its beautiful color and you’ll love that it’s scratch resistant. This decorative and protective finish is tougher than conventional paint.
|Another Name||Powder paint,Electrostatic powder coating, thermosetting powder coating|
|Type||Epoxy resin series|
|Main Material||Epoxy resin and hardner|
|Advantage||Good adhesion,good mechanical property,strong coating film,|
|excellent insulation,anticorrosion,energy-efficient,convenient operation.|
|Application Field||Apply to anticorrosive and insulative products:|
|Anticorrosion pipeline,rebar,bridge,steel structure,|
|pylon,tank,marine fittings,electric control cabinet,|
switch components,lighting sets.
|Color||Per standard panel &within the range negotiated by custom/supplier|
|Appearance(visual)||Smooth, slight orange peeled|
High gloss type≥85% Semi gloss type:51-84%
Low gloss type:50-15% Matt type:<14%
|Cured film thickness||60-80μm|
|Impact resistance(drop hammer)||High gloss 50kg.cm pass ( both direct and reverse). Semi-, low gloss and matt: pass (direct), per custom’s request(reverse).|
|Pencil hardness||2H without scratch|
|Adhesion(cross cut test)||1mm 6x6 0 grade|
|Bending test(tapering spindle)||3mm pass|
|Salt spray test||500h <1 grade|
|Humid heat resistance||500h <1 grade|
Test Standard or Method
|Type A||Type B,C|
|Adhesion(Planning grid method)||ISO2409||GB/T9286-1998||Grade 0|
|Salt test||ISO7253||GB/T1771-1991||> 500 hours|
|Heat test||ISO6270||GB/T1740-1979||> 1000 hours|
|Heat resistance||100°C/24 hours (white)||Paul Light character (best)|
All the indicators of film features will be down lightly depending on reducing of luster