RAL1002 sand yellow antique copper Textured Powder Coating for rebar, bridge
Do The Job Right with TOPO!
- Provides extremely durable finish
- Contains no environmentally harmful solvents
- 100% Virgin powder
- Impact resistant and flexibility
- Good chemical resistance
TOPO Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. TOPO Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With it, you can be assured of high transfer efficiency and brilliant colors.
This textured polyester powder cures to a surface approximating 80 grit sand paper without the sharp peaks. Great for numerous muscle car and hot rod applications. Cure at 400 degrees F for 20 minutes after flow out occurs (transitions from a dry powder to a liquid look).
|Another Name||Powder paint,Electrostatic powder coating, thermosetting powder coating|
|Type||Epoxy resin series|
|Main Material||Epoxy resin and hardner|
|Advantage||Good adhesion,good mechanical property,strong coating film,|
|excellent insulation,anticorrosion,energy-efficient,convenient operation.|
|Application Field||Apply to anticorrosive and insulative products:|
|Anticorrosion pipeline,rebar,bridge,steel structure,|
|pylon,tank,marine fittings,electric control cabinet,|
switch components,lighting sets.
|Mechanical Property||Pencil hardness||ISO 15184:1998,2H|
|Adhesion (by griding)||GB/T 9286-1998,0grade|
|Impact test||GB/T 1732-1993,≥50 kg.cm|
|Bending test||GB/T 6742 ,≤2mm|
|Cupping test||GB/T 9753,≥7mm|
|Chemical and Durability Test||Salt spray test||GB/T 1771,≥1000 hours,no obvious change ,|
|crossion width at cross≤2mm|
|Heat and moisture test||GB/T 1740,≥1000 hours,no change|
|Package||Inside by two-ply PVC bag,outside by carton,net weight 20kg|
|Storage Condition||Store in dry ventilated room,temperature under 35 degree centigrade,|
|avoid direct sunlight.|
When you contact us, we’ll ask about the end use of the coated item.
In addition to the varieties of color/gloss/texture, powder coats come in a multitude of chemistries specifically formulated for the environmental conditions to which they will be exposed. Powders may be thermosetting or thermoplastic, with common thermosets including TGIC (triglycidyl isocyanurate) Polyester, Polyurethane, Epoxy, and Hybrids. With an understanding of the end use, we can ensure that the powder coat you get looks just the way you want and performs as well as it looks.
Test Standard or Method
|Type A||Type B,C|
|Adhesion(Planning grid method)||ISO2409||GB/T9286-1998||Grade 0|
|Salt test||ISO7253||GB/T1771-1991||> 500 hours|
|Heat test||ISO6270||GB/T1740-1979||> 1000 hours|
|Heat resistance||100°C/24 hours (white)||Paul Light character (best)|
All the indicators of film features will be down lightly depending on reducing of luster