RAL1012 lemon yellow epoxy polyester Powder Coating with Good overbake resistance
Hybrid Powder Coating combines outstanding overbake and mechanical properties and is recommended for a broad range of interior functional and decorative applications.
Excellent application properties.
Very good overbake resistance.
Wide array of colors and textures available.
Very good chemical resistance.
Many applications including: tools, hot water heaters, office furniture, shelving, toys, oil filters and electronic enclosures.
Available Powder Types |
Available colors |
1. Epoxy powder coating |
1. RAL color |
2. Polyester powder coating |
2. Pantone color |
3. Epoxy polyester powder coating(hybrid) |
3. customer color matching |
4. Heat transfer printing powder coating |
Available finish |
5. Transparent powder coating |
1. smooth |
Available gloss level |
2. Rough(sand texture) |
1. High gloss (above80%) |
3. wrinkle(fine texture) |
2. Flat gloss (40-%-60%) |
4. Antique( Hammer tone) |
3. Semi gloss (10%-40%) |
5. Metallic |
4. Matt (below 10%) |
6. other special effect( artistic) |
Testing item |
epoxy polyester powder coatings |
Appearance(visual) |
Porous without particle agglomerate, homogeneous color |
Density(g/cm 3 ) |
1.4~1.6, depending on color |
Fineness(200 mesh sieve residue) |
< 0.5% |
Storage stability |
12 months |
Curing conditions |
General gloss type: 180 ° C/15-20min |
Appearance of film(visual) |
Smooth, slightly orange peeled |
Film thickness |
50~80μ m |
Gloss(60° gauge head) |
General gloss type>75% |
Losstype: 51~84%, matt |
|
Type: 5-50% |
|
Impact resistance |
50kg(4.9Nm) pass |
Cupping test |
> 7mm |
Scratch hardness |
4kg(39N) pass |
Bending test |
5mm pass |
Cross hatch adhesion |
100% adhesive |
Surface hardness |
2-3 H |
Salt spray test |
1000hr. Pass |
Humidity resistance |
1000hr. Pass |
Water immersion test |
240hr. Pass |
Acid resistance(5%HCL) |
500hr. Pass |