RAL1016 sulfur yellow color pure polyester non-TGIC powder coating with outstanding gloss retention
polyester TGIC powder coatings will provide good edge cover when sharp edges are present, due to the inherent higher melt viscosities of TGIC-based coatings, which may also increase surface roughness (orange peel). Over-bake color stability of TGIC-based coatings is excellent.
Although adhesion and corrosion resistance properties are similar to polyester urethane coatings, chemical and solvent resistance may be somewhat reduced.
Suitable for all kinds of products such as household appliances, instruments, meters medical devices,
automotive components, metal furniture, fitness equipment, indoor decorative painting, etc.
Also apply to a variety of equipment, pipes, pipe fittings and other requirements of corrosion coating.
|Type A||Type B,C|
|Salt test||ISO7253||GB/T1771-1991||> 500 hours|
|Heat test||ISO6270||GB/T1740-1979||> 1000 hours|
|Heat resistance||100°C/24 hours (white)||Paul Light character (best)|
Proportion : 1.2-1.8 (depending on the color and gloss ) .
8-10m³/kg, the membrane is 60μm (calculate by 100% utilization rate of powder coating).
|BY courier||TNT, DHL, UPS, 4-8 days|
|BY air||Usually 3-4 days|
|BY truck||Usually 10-15 days to arrive|