RAL1002 sand yellow decorative powder coating or functional application
* CURE SCHEDULE = 375F/15 MIN @ PART METAL TEMPERATURE
* GLOSS LEVEL = 95%+ ON 60 DEGREE METER
* RECOMMEND FILM THICKNESS = 1.8- 2.2 MILS
* SPECIFIC GRAVITY = 1.19
* THEORETICAL COVERAGE = 80.1 SQ. FT.
* SALT SPRAY RESULTS = 1,000+ HOURS
*** CLEAR COAT NEEDED. POWDER365 RECOMMENDS A CLEAR FOR PROLONGED EXTERIOR USE AND IMPROVED MAR RESISTANCE.
Metallic(Gold,Silver) effect, chrome (Red,blue,Green,Purple )effect, smooth effect, Art textures ( Smooth, Sandy, Hammer, Wrinkle, Chorm ,Metallic ) effect and so on.
According to RAL&PANTONE ,we accept customized.
Variety gloss and color:
high gloss (Above 85º)
semi gloss (10~85º)
no gloss (below 10º)
(gloss and color of product is made according to clients requirement)
Residential – Commercial – Industrial – Architectural – Marine
Automotive – Motor Cycle Frames – Wheels & Parts
Bicycles Frames & Parts – ATV’s – Airboats
Aluminum Extrusions – Decorative Metal – Trade Show Exhibits
Retail Displays – Fixtures – Sand Blasting
The overall quality of the coating system is largely dependent on the type and quality of the pre-treatment. The recommended types of pre-treatment for the most frequently used substrates are:
Zinc coated steel
Zinc phosphate or chromate conversion