Garden facilities metallic powder coat painting with white copper shining metal effect
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, wood, multi-color.
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure. Storage products in line with the above conditions, since the date of production, effective storage period is 6 months. Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust. Proposed operators wear appropriate dust mask, glasses. If possible, try to avoid long-term skin contact with powder coating
Our quality is stable and reliable. On basis of it, We establish good cooperation with IKEA,and 3 European famous companies.
We do not use poor quality raw material ,not use black resin and reclaimed powder,
All material are lead-free, RoHS compliance.
|Testing items||Inspecting index|
|Bending resistance||Pass 2-5 millimeters|
|Adhesion CHECKED TEST||Pass100/100, passes 0 levels|
|Cupdrawing:Erichsen, ISO1520||Pass 3-7 millimeters|
|Pencil hardness||Pass H-2H|
|Chemical resistance and weather resistance|
|Salt spray test||The cross section of corrosion less than 2MM|
|Hot and damp resistance test||Without air bubbles, loses the light slightly|
|Acid resistance||Without air bubbles, the surface without damage|
|Alkali resistance||Without air bubbles, the surface without damage|
|Heat resistance||The color change is lower than E=1.5|
|Solvent resistance||Without air bubbles, the surface without damage|
Gloss higher than 80% lower than the
Munsell color change level
|Water tolerance of||
No bubble, not falling, losing light