Copper Textured Antique Powder Coating powder
The antique finish powder coatings with highly decorative finishes consisting of a base color with a vein pattern of a distinctly different color.The base color is usually black,white or other colors.The vein pattern could be metallic(silver,gold or copper).
The raw materials of Powder coating are resins, pigments, fillers, harderner ect.
Compared with liquid paint, powder coating is environmental friendly and can reduce costs. Powder coating can form a harder finish than conventional paint and can be applied more efficient. it has super chemical resistance and mechanical properties. It can be used in painting those metal products that have special requirement of corrosion resistance, electric insulativity and pliability.While it also has disadvantages, it is not good for large and heat-sensitive objects. Usually the thickness of film by powder coating is >30 μm.
- Specific gravity: 1.25-1.75 ( depend on colors)
- Particle size distribution(Laser Particle size analyser): Less than 5% above 100μm;50-65% above 32 μm
- Average particle size:35-45 μm
- Curing Schedule: 200°C 10minutes
- Optimal film thickness: 60-80μm
- 8-12 square meters/kg, thickness 60μm(100% of utilization rate)
The data above is rough and for reference only, please contact me for more accurate data when you have clear demands.
||Apply to anticorrosive and insulative products:
|Anticorrosion pipeline,rebar,bridge,steel structure,
|pylon,tank,marine fittings,electric control cabinet,
|switch components,lighting sets.
||Electrostatic spray/Triboelectric gun spray.
|Recommended curing condition:200 degree centigrade for 12 minutes
|(object surface temperature),range from 190 degree centigrade
|for 20 minutes to 210 degree centigrade for 8minutes.
|Recommended film thickness:50~80um, range from 40~150um
||1.4~1.8g/cm3 as per formula and color
||0.5mm thickness cold rolled steel sheet
||Remove rust and grease
||200 degree centigrade for 12 minutes
|Adhesion (by griding)
||GB/T 1732-1993,≥50 kg.cm
||GB/T 6742 ,≤2mm
|Chemical and Durability Test
||Salt spray test
||GB/T 1771,≥1000 hours,no obvious change ,
|crossion width at cross≤2mm
|Heat and moisture test
||GB/T 1740,≥1000 hours,no change
Health and safety:
This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.
Purchase Note: rough texture spray paint
1. M.O.Q : rough texture spray paint
The minimum order is 200kg ,each color ≥ 100kg
2. Colors: rough texture spray paint
RAL color :we usually use RAL colors that is widely used in paint industry and easily find in market
Custom color : Color matching is available , if you have colors model ,please send to us for matching .
3. Prices: exterior rough texture paint
Prices depend on the colors and using environment ,for prices please tell us the colors and using environment (indoor use or outdoor use).
4. Time of delivery :
Production will take about 5-8 days after receipt of prepayment,this is subject to the quantity .
5. Payment :
30% T/T prepayment , 70% T/T before shipment (or against BL) or LC at sight .
6. Samples: exterior rough texture paint
1kg powder sample is available for each color for your testing.
Sample is free of cost,but if you pay for the air freight we will highly appreciate
Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.